{
  "_comment": "Self-contained Bambu Studio / OrcaSlicer-style example, not a validated printer preset. Replace the bed, nozzle, limits and start/end G-code for your printer. No inherited files are required. Import a filament profile separately.",
  "type": "machine",
  "name": "Example JSON printer - 0.9 mm nozzle",
  "printable_area": ["0x0", "250x0", "250x210", "0x210"],
  "printable_height": "210",
  "nozzle_diameter": ["0.9"],
  "layer_height": "0.45",
  "gcode_flavor": "marlin2",
  "machine_limits_usage": "emit_to_gcode",
  "machine_max_speed_x": ["200"],
  "machine_max_speed_y": ["200"],
  "machine_max_speed_z": ["12"],
  "machine_max_speed_e": ["120"],
  "machine_max_acceleration_x": ["1000"],
  "machine_max_acceleration_y": ["1000"],
  "machine_max_acceleration_z": ["200"],
  "machine_max_acceleration_e": ["5000"],
  "machine_max_acceleration_extruding": ["800"],
  "machine_max_acceleration_retracting": ["1000"],
  "machine_max_acceleration_travel": ["1500"],
  "machine_max_jerk_x": ["8"],
  "machine_max_jerk_y": ["8"],
  "machine_max_jerk_z": ["0.4"],
  "machine_max_jerk_e": ["4.5"],
  "machine_start_gcode": "G90\nM83\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nG28\nM107",
  "machine_end_gcode": "G1 Z{max_layer_z + 2} F720\nM104 S0\nM140 S0\nM107\nM84"
}